Logo
Username:
Password: Forgot?
Register
Nite
Contact Details:
Personal info:
Real name: N/A
Gender: Male
Location:
Country: United States
DOB: N/A
Site: N/A
Stats:
Joined: Jan 20th, 2012 @ 10:39 pm
Last Visit: Yesterday @ 6:07 pm
Member: #52
Posts: 1396
Group: Member
The christmas present thread. (Post)Certainly!


The christmas present thread. (Post)Got my presents pretty dang early this year!
My family updated my airbrushing kit.

I now have:
a maintenance kit (Picks and brushes, as well as a cleaning jar)
A turntable
Some mutant 3rd hand. (With about 6 arms, this is sure to be useful)
And a fume hood.

I know it doesn't sound like much, but this is all stuff I've been needing to get. And that fume hood is pretty expensive!
I'm going to get a lot of use out of this stuff! :D
A modified coffee pot. (UGLY MOD AHOY!) (Post)


Likely the ugliest thing I've ever done. but, this thing works as intended.
Parts were extracted from a broken coffee pot. The timing functions still operate as intended, supplying power to whatever is connected to the electrical outlet I've installed in place of the heating element from the coffee pot.
Also, in case it isn't obvious, the tool of choice was a steak knife. the rest was hot glue.
What are you listening to? (Post)
I did stupid (Post)Oh dear. That's never fun.

Hopefully it can be recovered safely before the system decides to re-allocate the space.

Do NOT Defragment your hard drive until you are certain that you can, or cannot recover that data.
DennyDevito72 (Post)
Gee, it sure is boring around here (Post)Discord is suffering an outage as well.

Lets watch some Family Feud.

Project Raspberry Pi Famicom. (Post)All in due time. Seems my board is going to be a biiiiit delayed.... Wish the seller would let me know why, but that is an outside dispute to be disputed outside.
Nite makes Music, (No, really) (Post)http://www.mediafire.com/file/qo3dozcdl6mt9g3/evil_morty.ogg
Project Raspberry Pi Famicom. (Post)So, I'm still waiting for the circuit board to arrive, but I've gotten some preliminary work done on the shell.
Microswitches mounted to the Eject and Reset buttons so that they might serve a purpose, and USB jumpers mounted to the controller ports. (I am going to need to shorten those at some point.) A 3rd USB port is planned to be mounted inside the cartridge slot, but until I can get that planned out, the USB in controller slot 2 should work just as well.


If everything goes according to plan, this is all the cosmetic differences there will be.

I have ordered a Raspberry Pi 3 Model B to use inside this thing, and have already downloaded everything that I should need.
...It just needs to arrive...

Lithosphere skin 1.0.0 © 2009-10 Matt